Truck/Car Indicator Kit

In stock
£16.99 ×




For Use with Standard PWM/PPM Radio Control Systems.

Yet another handmade, professionally designed British module Lighting Module specifically designed and manufactured for the RC Car and Truck Enthusiast.

This module plugs in-line with your steering Servo line and gives a realistic Left and Right Turn Indicators which operate whenever your vehicle steering is directed Left or Right.


      • Truck / Rock Crawler
      • Model Car
      • Tamiya 1/10 & 1/14 Scale Articulated Truck

Features include:-

  • Plug and Go RC Connections
  • Uses any Standard Serviceable Service
  • SMT Design (Not Socketed Components)
  • Shakeproof Vibrationproof Crashproof Construction
  • Standard 3 Wire Futaba Connection (PWM)
  • Built-In Lost Signal Indicator
  • Receiver Standby Current Draw 11µA
  • Built In Anti-Glitch Firmware
  • Small 24mm x 15mm footprint
  • Ultra Lightweight - Only 3.9g

Adobe PDF ReaderDownload the Product Information Sheet

The module plugs directly inline between the Steering Servo and RC Receiver.

Six (6) Amber Leds, three for Right, three for Left are soldered to the Tags.

The kit is supplied with six (6) pre-wired 3mm 15,000Mcd Hi Intensity LED's on 304mm (12") Kynar silver plated oxygen free, high conductivity single core microfine fly leads 0.387mm in diameter, which will need to be soldered to the module upon installation.

Basic soldering skills are essential to connect the fly leads to the Switch Module when it is installed into your model however, if soldering is not one of your better skills, we can supply the wiring pre-connected and ready to install at no additional cost.

The LED's are normally 3mm Amber. 2 front, 2 rear and 2 side repeaters, but Red, White or Blue 3mm or 5mm can be supplied at no extra cost. Longer leads can be supplied at an additional small cost.

Please use the dropdown selector above to choose which colour of LED's you would like. If you would like a combination of colours, please contact us by e-mail as soon as you place your order.

Each Indicator Light (LED) wiring is colour coordinated for ease of installation. Orange/Black, White/Black or Red/Black. The Black conductors are all common connected to the same terminal on the module.

LED's Select Colour & Size 3mm Orange
5mm Orange
3mm Yellow
5mm Yellow
Weight (inc. packing) 49 g

Categories: Truck/Car

Truck/Car Indicator Kit reviews

Average customer rating: (2)

no rate
Read all 2 reviews on Truck/Car Indicator Kit