26A 'H' BRIDGE TRENCH HEXFET ESC

In stock
£21.95 ×

Single Sound Generator

Introducing our latest product in Radio Controlled Motor Controllers, this innovative Module efficiently gives you a clean smooth acceleration and deceleration curve from stopped to full power in either forward or reverse.

Features

  1. Solid State Bi-Directional Output Construction
  2. Fully Bi Directional (Works in Forward and Reverse Modes)
  3. 'H' Bridge TRENCH™ HEXFET Design
  4. Built In 1.1A Low Dropout BEC (Battery Eliminator Circuit)
  5. Optional 2.2A BEC (available from drop-down selection on ordering)
  6. Selectable BEC - No BEC Option Jumper
  7. Automatic LVC (Low Voltage Cutoff) Battery Terminal Voltage Analysis Handles most 5.5v - 12v Battery types
  8. 26A Maximum Motor Current
  9. 26A Continuous, Peak 30A, Burst 32A up to 5 Secs.
  10. Throttle Neutral At Standard 1.5ms, Or 1.37ms For Offset Stick
  11. F.i.S.T© Finger Safety Technology Arming. (Motor Will Not Start Until Throttle In Neutral Position)**
  12. Ultra Lightweight SMD (Surface Mount Device) Fabrication
  13. D/S Frg4 Gold Plated PTH PCB
  14. Full Specification Rohs Components

Battery and Motor Tails 160mm
RC Lead 150mm

Weight (Not including Tails) 65g
Voltage 6.1v - 13.8V
Current Draw 70mA Nom 31mA Quiescent (Not incl. B.E.C.)

An Onboard Jumper allows you to select or de-select the the onboard Battery Elimination Circuit (BEC)

Adobe Reader mnemonic Download the Product Information Sheet

This is a hand crafted Surface Mount Technology (SMT), professionally designed all British module, built with top quality RoHS (Restriction of Hazardous Substances Directive) high specification components. RoHS Logo Vector Download

20A H Bridge ESC



Battery Voltage Cutoff Table

BATTERY VOLTS CUTOFF BATTERY TYPE
6.5V
5.5V
6V SLA (Sealed Lead Acid)
7.0V
6.0V
7.2V Ni-Cad(6 cells)
7.4V
6.1V
7.4V Li-Po (2 cells)
7.5V
6.0V
7.2V NiMH (6 cells)
8.0V
6.0V
7.2V Ni-Cad(6 cells)
8.5V
7.0V
8.4V Ni-Cad(7 cells)
9.0V
7.0V
8.4V NiMH (7 cells)
9.5V
7.0V
8.4V Ni-Cad (7 cells)
10.0V
8.0V
9.6V Ni-Cad (8 cells)
10.5V
8.0V
9.6V NiMH (8 cells)
11.0V
8.0V
9.6V Ni-Cad (8 cells)
11.1V
9.0V
11.1V Li-Po (3 Cells)
11.5V
11.1V
12V SLA (Sealed Lead Acid)
The ‘CUTOFF’ Voltage is the Battery Terminal Voltage (tV) that the ‘ESC’ will shutdown to prevent damaging the battery cells or in the case
of LiPo cells cause a fire through overheating. i.e. a 12v Sealed Lead Acid (SLA) Battery has a spent life terminal voltage of 11.1v.



26A 'H' BRIDGE ESC DRAWING

20 Bridge ESC Drawing




RECOMMENDED INSTALLATION

20A Bridge ESC

Weight (inc. packing) 26 g

Categories: Marine Model Submarine Bait-Boat Parts Truck/Car

26A 'H' BRIDGE TRENCH HEXFET ESC reviews

Be the first to write a review of this product!