Servo Switch

AVAILABLE IN TWO FLAVOURS (Chosen from above)

Expanded Swing 5° to 180°

5° to 180° Fully Adjustable Servo Switch Expander from 5° to 180° with Speed Control.

Following on from our very popular 180° Servo Expander (Stretcher) another innovative module allows you to control the Servo Swing Arc from the a minimum 5° up to either 90° or 180° in two selectable choices.

The module controls the swing arc of forward and reverse and the swing speed.

The Module is triggered by a mechanical switch action in a pre-selected mode of Bi-Direction or One Shot.

A further option allows the module to be triggered from an electronic switch such as an RC standard pico switch

Features

• Power and Activity LED
• Easy Adjustment with 1.3mm Flatblade Driver or Trim Tool
• Lightweight Construction (4.8g nominal)

Applications

1. Drone Camera Control
2. Submarine Camera Control
3. Tip to Tip Camera
4. Model Tipper Truck
5. Bait-Boat Hopper Release

Options:
the Options are pre-selected by two Jumper Pins on the Rear of the PCB

Option 1 MODE Jumper Closed - One Shot (Servo Swings from Full Limit Forward to Full Limit Reverse)
Option 1 MODE Jumper Open - Bi-Direction (Servo Swings From either Fully Forward to Full Reverse ONCE)

Option 2 POLARITY Jumper Closed - Active HIGH (The Switch is Triggered by a Low to High Transition)
Option 2 POLARITY Jumper Open - Active LOW (The Switch is Triggered by a High to Low Transition)

OPTIONS VIEW

SWING ADJUSTMENTS AND SPEED

Swing and speed adjustment is carried out with the on board Presets. Adjusting the top preset (Forward Swing) controls the Servo
swing from centre to the maximum Forward mechanical Swing. Adjusting the centre present (Reverse Swing) will control the Servo
swing from centre to the maximum Reverse mechanical swing.
Adjusting the Speed preset will control the speed from a slow steady swing to a rapid swing.

ADJUSTMENT DETAIL

USING AN RC pico SWITCH AS A TRIGGER SOURCE